SVA Aluminum

Smoke Vent, Single Leaf

Product Overview

SVA Single Leaf Introduction

Acudor Smoke Vents are designed to provide an economical solution for fire ventilation by removing deadly smoke, heat, and gases from a burning building. Single leaf Smoke Vents are used for smaller areas that need venting, including elevator shafts and stairwells. Single leaf units are not U.L. Listed.

Cover

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum with a 20 gauge aluminum inside liner.

Curb

1/8" Aluminum with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Hinge

Aluminum pintle hinges with 3/8" pin

Opening

Gas spring operators allow cover to open and close with ease. Inside and outside release allows for manual lid operation.

Door Latch

Self latching Slam Latch. Supplied standard with 165° UL Listed Fusible Link. Resettable McCabe link available.

Finish

Mill Finish

Product Highlights

1/8" thick aluminum
12" high insulated curb
High performance gas springs
Inside and Outside manual release
UL Listed Fusible or McCabe Resettable Link
Stainless Steel Hardware

Request Information

Do you have a question regarding our products? Do you need more information for your project? Please don’t hesitate to reach out, we’re here to help!

Ask Acudor

Specifications

SVA STANDARD SIZES

Other sizes available upon request

	Curb ID W&L	Weight per Hatch
Model	inches (mm)	lbs. (kg.)
SVA2424	24 x 24 (610 x 610)	60 (27.3)
SVA2436	24 x 36 (610 x 914)	70 (31.8)
SVA3030	30 x 30 (762 x 762)	75 (34.0)
SVA3036	30 x 36 (762 x 914)	85 (38.6)
SVA3096	30 x 96 (762 x 2438)	212 (96.1)
SVA3636	36 x 36 (914 x 914)	95 (43.2)
SVA4848	48 x 48 (1219 x 1219)	123 (55.8)