Skip to main content

ADWT - Stainless Steel

Airtight/Watertight

Product Overview

ADWT - Stainless Steel Introduction

The Acudor ADWT is an Air and Watertight steel access door. The ADWT is ideal for use in laboratories, clean rooms, operating rooms, and additional applications where an airtight/watertight seal is required

  • Door / Door Frame

    Flush to frame with reinforced edges Stainless Steel or Steel: 16 gauge door; 16 gauge mounting frame
  • Hinge

    Continuous exposed piano hinge. Stainless Steel model to have stainless hinge. Steel model to have steel hinge.
  • Gasket

    Continuous Bulb Trim Seal
  • Standard Latch

    Stainless Steel phillips head screws standard
  • Optional Latches/Locks

    Stainless steel allen head screws, stainless steel spanner head screws, torx, cylinder lock & key
  • Finish

    Steel: 5 stage iron phosphate preparation with baked white finish or Stainless Steel: Type 304 #4 Satin Polish
  • ASTM E283/E283M-19

    “Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen”, for Air Infiltration & Exfiltration at 300Pa (6.27 psf) with result of maximum leakage ≤ 0.1 L/s/m² (0.01 cfm/ft²)
  • ASTM E331-00(2016)

    “Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference”, for Water Penetration resistance at 720Pa (15.04 psf) with result of no leakage.
Specialty Access Doors

Product Downloads

Product InformationSubmittal Drawing3D ViewBIM Archicad
ADWT - Stainless Steel

Product Highlights

Check Icon
Tested for air infiltration, exfiltration and water penetration
Check Icon
Air Infiltration : Leakage ≤ 0.01 cfm/sq foot at 6.27 psf – ASTM E 283/E283M-19
Check Icon
Water Penetration : No leakage at 15.04 psf – ASTM E 331-00(2016)
Check Icon
Continuous Bulb Trim Gasket
Acudor contact us

Request Information

Do you have a question regarding our products? Do you need more information for your project?
Please don’t hesitate to reach out, we’re here to help!

Specifications

STANDARD SIZES

Other sizes available upon request

 

Nominal Door SizeW&H Weight per Door
Inches mmlbs.kg.
8 X 8 203 X 203 6.0 2.7
12 X 12 305 X 305 7.4 3.3
14 X 14 355 X 355 9.0 4.1
16 X 16 400 X 400 13.0 5.9
18 X 18 457 X 457 15.6 7.1
24 X 24 610 X 610 18.8 8.5
24 X 36 610 X 914 29.5 13.4
30 X 30 762 X 762 28.9 13.1
36 X 36 914 X 914 39.0 17.7
30 X 48 762 X 1219 42.9 19.5
36 X 48 914 X 1219 45.0 20.4

Wall or ceiling opening is nominal door size + 3/8” ( 9 mm)
For detailed specifications see submittal sheet

ADWT