Ladder Access Roof Hatch
Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.
Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 11 gauge aluminum with a 20 gauge aluminum inside liner.
11 gauge aluminum with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange an pre-drilled mounting holes.
Heavy duty Aluminum pintle hinges with 3/8" SS pin
Gas spring operators allow cover to open and close with ease. Stainless Steel Inside pull handle allows for easy control when closing cover.
Self latching, Stainless steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Mill finish.
Stainless Steel Hardware standard on all hatches
1" Polyiso (R-6) insulation standard on all hatches
EPDM foam weather/draft seal gaskets provides weather tight construction
Supports 40lbs./sq. ft. live load
Do you have a question regarding our products? Do you need more information for your project? Please don’t hesitate to reach out, we’re here to help!
(Special sizes up to 197” x 197” available upon request)
Curb ID W&L | Weight per Hatch | |
---|---|---|
Model | inches (mm) | lbs. (kg.) |
A3232 | 24 x 24 (610 x 610) | 60 (27.3) |
A3238 | 24 x 30 (610 x 762) | 65 (29.4) |
A3244 | 24 X 36 (610 X 914) | 70 (31.8) |
A3838 | 30 x 30 (762 x 762) | 80 (36.2) |
A3844 | 30 x 36 (762 x 914) | 85 (38.6) |
A4444 | 36 x 36 (914 x 914) | 95 (43.2) |
For detailed specifications see submittal sheet
Acudor Electric Actuation Roof Hatches are designed to provide convenient, economical access to the roof of a building with …...
Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.