FC-300 Introduction
The Acudor FC-300 is an aluminum, channel-frame floor door. The FC-300 is designed for Indoor or Outdoor applications where dirt and water are prevented from falling into work area. Drainage is provided through threaded coupling in channel.
-
Material:
Aluminum door and frame; stainless steel hinges and hardware -
Door:
1/4" aluminum diamond plate reinforced for live load of 300 lb/sq. ft. -
Frame:
Angle frame fabricated from aluminum extrusion with an integral 1" anchor flange -
Hinge:
Stainless steel butt hinges with tamperproof stainless steel bolts & nuts -
Opening Device:
Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. When required, stainless steel compression springs can be provided to add lift assistance. Available with electrical actuators, operated by wall mounted push button switch, and remote control -
Standard Latch:
Flush aluminum drop handle with staple for padlock. -
Optional Latches / Locks:
Recessed padlock provision: st/stl slamlock -
Finish:
Mill finish, with optional bituminous coating on exterior of frame
Floor Doors
Product Downloads
| Product Information | Submittal Drawing | BIM | |
|---|---|---|---|
|
FC-300
|
|
|
|
Product Highlights
Channel frame construction with 1 1/2” drainage coupling and integral anchor flange is designed to be cast into concrete
1/4" aluminum diamond plate door panel reinforced for live load of 300 lb/sq. ft
Diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm
Angle frame fabricated from aluminum extrusion with an integral 1" anchor flange
Request Information
Do you have a question regarding our products? Do you need more information for your project?
Please don’t hesitate to reach out, we’re here to help!
