CD-5080
Duct Doors for Sheet Metal Duct
Product Overview
CD-5080 Introduction
The Acudor CD-5080 is a hingeless duct door for sheet metal ducts. The CD-5080 assures a tight seal without obstruction in the air system.
Galvanized steel, double panel
24 gauge
24 gauge with 5/8" notched knock over tabs
1/8" thick by 1/2" wide closed cell neoprene gasketing between door and frame and also between frame and duct
Door panel filled with 2" fiberglass insulation (7.7 R factor), compressed into 1".
Self tightening, hand operated cam latch
Cylinder Lock & Key, HASP + Staple, L-Handle
Product Highlights
-
Insulated door panel, along with the gasketing between the door and frame
-
5/8” notched knock over tabs on the inside of the frame provide for easy installation
-
Designed for use in LOW to medium pressure up to 3” static W.G.
-
Self tightening, hand operated cam latch
Request Information
Do you have a question regarding our products? Do you need more information for your project? Please don’t hesitate to reach out, we’re here to help!
Specifications
STANDARD SIZES
Other sizes available upon request
| Nominal Door Size W&H | Weight per Door | |||
|---|---|---|---|---|
| Inches | mm | Opening | lbs. | kg. |
| 6 X 6 | 152 X 152 | 4.75” X 4.75” | 1.10 | 0.5 |
| 8 X 8 | 203 X 203 | 6.7 5” X 6.75” | 1.70 | 0.8 |
| 10 X 10 | 254 X 254 | 8.75” X 8.75” | 2.40 | 1.1 |
| 12 X 12 | 304 X 304 | 10.75”X 10.75” | 3.25 | 1.5 |
| 14 X 14 | 356 X 356 | 12.75” X 12.75” | 4.20 | 1.9 |
| 16 X 16 | 406 X 406 | 14.75” X 14.75” | 5.10 | 2.3 |
| 18 X 18 | 457 X 457 | 16.75” X 16.75” | 6.40 | 2.9 |
| 20 X 20 | 508 X 508 | 18.75” X 18.75” | 7.80 | 3.5 |
| 24 X 24 | 610 X 610 | 22.75” X 22.75” | 10.60 | 4.8 |
Duct opening is normal door size -1 1/4” or (31 mm)
For detailed specifications see submittal sheet
