RHADD title total

 RHA RHG image

 

Application

Acudor Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. The Polycarbonate Domes provide the benefit of a skylight.

 

Features RHADD + RHGDD

  • Clear, bronz, white, combination polycarbonate double-skin dome

 

Optional Features RHADD + RHGDD

  • Stainless Steel cover, curb, and/or hardware
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • All Aluminum construction, cover and curb

 

RHADD Specifications:

Cover: Double-skin construction (“in box type design”) with 1" fibreglass insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8" thick aluminum. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided.

Curb: 1/8" Aluminum with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes

Hinge: Heavy Duty Aluminum pintle hinges with 3/8" pin

Opening: Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.

Door Latch: Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.

Finish: Mill finish

 

RHGDD Specifications:

Cover: Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 1/8” thick aluminum. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided.

Curb: 14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Hinge: Heavy duty galvanized steel pintle hinges with 3/8" pin

Opening: Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.

Door Latch: Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.

Finish: (Curb) Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint, (Cover) Mill finish.

 

RHADD chart
RHADD schematic

 

 

 

 

RHGDD chart
RHGDD schematic

RHADD Access

RHADD Submittal

RHGDD Access

RHGDD Submittal

 

LET US HELP YOU
In the U.S.A. 
info@acudor.com 
(973) 575.5120 
800.722.0501 
...........................................

In CANADA
info@acudor.ca 
(905) 683.6121 
844.228.3671

ACUDOR

ACCESS to EVERYTHING

 

 

 

 

 

 

GOT A QUESTION

Legal

Site Map

Privacy Policy

 

 

 

LET US HELP YOU
In the U.S.A.
info@acudor.com
(973) 575.5120
800.722.0501
...........................................

In CANADA
info@acudor.ca
(905) 683.6121
844.228.3671

Copyright © 2017 Nelson Industrial Inc.